The TopHat Protector Ring is used to protect the shaft from impact. You can use it on the front and back of the shaft for optimal protection. The Protector Ring is placed onto a carbon shaft before the assembly of insert or nock. Thus, the durability of the carbon shaft after missed shots is increased significantly. Even with hits on hard objects, the Protector Ring will often prevent the destruction of the front part of the carbon shaft.
A great product which is worth every single penny!
Check the data file in the images to see what size you need for your Bearpaw shafts
3D point from the brand Bearpaw, these stainless steel points will never rust and every one comes with a special rubber O-ring to keep your tips in place and to eliminate arrow tip rattling. These point are available in several weights.
Specs Bearpaw 3D Combopoint Stainless Steel
Material: Stainless steel
Type: Screw-in point
Diameter: 5/16 inch
Color: Silver
Weights: 65, 85, 100, 125, 14, 175, 200, 250, 300 grain
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: Stainless SteelType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100 grainWeight 11/32: 80, 100, 125 grain
Great points by TopHat, where other points might sometimes turn a bit loose over time, this points stays nice and tight because of the standard rubber o-ring. Just like points for wooden arrows, these points are a tiny bit wider than the shaft, making it easier to remove the arrow from the target.
This point is especially designed for 3D archery and because of it’s shape, really effective. This model point penetrates the target straighter then others, giving less tension in the shaft, giving it less chance of breaking.
Features
Material: Stainless Steel
Sizes: 9/32 and 5/16
Weight: 60 grain – 85 grain – 100 grain – 125 grain
These weights are our standard assortment, we are able to supply you with all TopHat products, so if you need an other weight please let us know.
Screw-on point for wooded shafts. As these Points are parallel these is no need to taper or prepare the shaft, the points can be installed without tapering.
Specifications:
Material: SteelType: Parallel Screw-onDiameter: 5/16 and 11/32Weight 5/16: 70, 100 grainWeight 11/32: 100, 125 grain
Blunt points are used al over the world for practice. Also great for children who want to shoot at bottles, cans, trees etc. The Slip-Over blunt is placed over the regular point and is available in two sizes, 5/16 and 11/32. The smaller one, 5/16, is also compatible with fiberglass and wooden recreational arrows with the rounded point.
Features
Sizes: 5/16 or 11/32Color: BlackWeight 5/16: 100 grainWeight 11/32: 125 grain
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: BrassType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100 grainWeight 11/32: 80, 100, 125 grain
The Penthalon Break Up Point is especially made for the Penthalon Slim Line shafts. The several pieces of the point can be broken off at the desired place to choose the weight you want to use.
Specifications Bearpaw Penthalon Slim Line Break-up Point:
Material: Stainless Steel
Spine 300-500, weight: 125, 100 or 75 grain.
Spine 600-800, weight: 125, 100 or 75 grain.
Spine 1000-1600, weight: 100, 75 or 50 grain.
Made in Germany
The classic bullet point is a very popular point. It is very common with Fita shooters, the shape makes it a target friendly point and easy to remove from the target.
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: BrassType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100, 125 grainWeight 11/32: 80, 100, 125 grain
Skylon screw tips for the various carbon arrows from Skylon. The diameter of the screw thread is universal, so that these points can be screwed into any insert, pay attention to the outside diameter of the relevant arrow.
A really durable point, with almost surgical precision, made from tough tool steel (wich is also used to make tools). Designed for target and 3D shooting, with a long spiked tip for super straight penetration and less glance out in full targets. This point makes it’s own way in stead of following the easiest way in a target. Just like the other TopHat screw in points, this model also has the rubber o-ring wich makes sure the points will stay exactly as tight as it was.
Features
Material: Stainless tool steel
Sizes: 9/32 and 5/16
Weight: 40 grain – 60 grain – 80 grain – 100 grain – 120 grain
Great points by TopHat, where other points might sometimes turn a bit loose over time, this point stays nice and tight because of the standard rubber o-ring. Just like points for wooden arrows, these points are a tiny bit wider than the shaft, making it easier to remove the arrow from the target.
This classic bullet shape is a very common model point. You see it a lot, in for example, Fita target shooting. It’s round shape makes it a bit more target friendly and easier to remove.
Features
Material: Stainless Steel
Sizes: 9/32 and 5/16
Weight: 85 grain – 100 grain – 125 grain – 145 grain (only 5/16)
These points from Skylon are suitable for the ID6.2 mm arrows from Skylon, for example, but also fit on other shafts with the same diameter. These so-called S-size points have a weight of 100 grain and must be glued into the shaft. Suitable for all Skylon ID6.2 shafts from spine 300 to spine 800.
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: Nickel-plated SteelSize: 5/16 (70 and 100 grain) and 11/32 (80, 100 and 125 grain)
These points from Skylon are suitable for the ID5.2 mm arrows from Skylon, for example, but also fit on other shafts with the same diameter. These so-called X-size points are degradable (80, 90 or 100 grain) and must be glued into the shaft. Suitable for all Skylon ID5.2 shafts from spine 300 to spine 500.
The classic bullet point is a very popular point. It is very common with Fita shooters, the shape makes it a target friendly point and easy to remove from the target.
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: Burnished SteelType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100 grainWeight 11/32: 100, 125 grain
Blunt points are used al over the world for practice. Also great for children who want to shoot at bottles, cans, trees etc. The Bearpaw Blunt Screw-in is available in two weights and is suitable for every standard .245 insert.
Features
Colour: BlackWeights: 100 or 125 grain
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Specifications
Material: Burnished SteelType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100 grainWeight 11/32: 80, 100, 125 grain
The Bearpoint Glue-on Point Parallel is glued directly onto the compressed shaft and therefore minimizes the breaking of arrows behind the point.
Features
Material: SteelType: Parallel glue-on pointDiameter: 5/15 and 11/32Weight 5/16: 70, 100, 125 grainWeight 11/32: 80, 100, 125, 145 grain
The classic bullet point is a very popular point. It is very common with Fita shooters, the shape makes it a target friendly point and easy to remove from the target.
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: Steel-NikkelType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100 grainWeight 11/32: 80, 100, 125 grain
Screw-on point for wooded shafts. As these Field Points are parallel these is no need to taper or prepare the shaft, the points can be installed without tapering.Available sizes and weights:- 5/16: 70, 100 and 125 grain- 11/32: 80, 100 and 125 grain
![[SALE] TopHat 3D StNi](https://www.3darcherystore.com/media/f1/14/be/1648817061/TopHat-3D-StNi.jpg?ts=1648817061 "[SALE] TopHat 3D StNi")
![[SALE] TopHat Bu St/blued](https://www.3darcherystore.com/media/d7/cc/b8/1648817122/TopHat-Classic-St-blued.jpg?ts=1648817122 "[SALE] TopHat Bu St/blued")
![[SALE] TopHat BU StNi](https://www.3darcherystore.com/media/8b/fe/5a/1648817127/TOPHAT-BU-STNI.jpg?ts=1648817127 "[SALE] TopHat BU StNi")
