Must have tool for every archer! A bow square is a great tool to measure the brace height and necessary when placing the nockpoint.
Good bow square for a good price!Color of the bow square may vary.
The WNS Bow Square is a crucial tool when setting up your bow and should be in every archers basic kit. From brace height to nock points to tillering, the bow hook is used for it all.
Feautures
Simple and effective bow tuning essential.Ideal for measuring nock position, tiller and bracing height.12″ long marked in inches and cm.
Folding set of hex keys/ allen keys from Bondhus.
Key features:
Set of imperial allen (inches) keys.Includes key sizes commonly used by archery manufacturers.Compact design ideal for keeping in a quiver.Durable.Easy access to the key you want.Includes the following sizes of key: .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16
Folding set of hex keys/ allen keys from Bondhus.
Key features:
Set of metric allen (cm) keys.Includes key sizes commonly used by archery manufacturers.Compact design ideal for keeping in a quiver.Durable.Easy access to the key you want.Includes the following sizes of key: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm
The Easton Draw Lenght Indicator makes it easy to measure your draw lenght up to 34 inch. The clear marks on the shaft show the exact draw lenght in inches.
Ofcourse you should never shoot this shaft!
Folding set of hex keys/ allen keys from Bondhus.
Key features:
Set of imperial allen (inches) keys.Includes key sizes commonly used by archery manufacturers.Compact design ideal for keeping in a quiver.Durable.Easy access to the key you want.Includes the following sizes of key: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4.
Nock Tuning Tool for Easton G Nocks. A great tool that enables you to quickly tune your nocks whilst on the line or out in the bush without risk of damaging them. A must for every archer using G nocks or any other small nock. For proper use insert nock into the nock tool until it is fully seated inside.
Nock Tuning Tool for Easton Nocks. A great tool that enables you to quickly tune your nocks whilst on the line or out in the bush without risk of damaging them. A must for every archer using Easton nocks or any other bigger nock, like the Bearpaw Speed nock .245. For proper use insert nock into the nock tool until it is fully seated inside.
For smaller nocks we recommend the Easton G-nock Tool
Color: Orange
Nock Pliers by Cartel for installing the nock point.
Features:
Install brass nocks without damaging the string.Suitable for all sizes of nock.Rubber coated handles for a secure and comfortable grip.
Perfect compact and lightweight scale to weigh shafts, points, vanes, nocks etc. Very useful tool when you like to make your own arrows.
Features
Total size: 5″ x 3″ x 3/4″ inch
Total weight: 5 oz, with batteries
Capacity: 100g x 0.01g
Batteries: 2 x AAA included
Auto-off power saver mode
Backlit LCD screen
771 grain max with.15 grain accuracy
Measures to the nearest tenth (.1)
Self-contained protective case
Efficient and compact set of Torx keys by Bondhus. This set fits all Torx and Star screws with the corresponding sizes. In addition, the foldable set is provided with a Gorilla Grip handle, ensuring extra grip!
Includes 8 key sizes: T6, T7, T8, T9, T10, T15, T20, T25
The Rip Clutch by Beiter is the ideal addition to your workbench to hold your bow for you when tuning your bow or if you are looking for a neat way to store your bowwhile still wanting it at the ready.
Easy tool foor installing and removing nocks in all sizes. Includes a threaded shank for easy removal of broken nocks. Small size so easily fits in your quiver.
The Beier Bow Holder Vise is a great tool when mounting accessories to your bow or to control the limb alignement. Thanks to the 360 degrees rotation, you can hold the bow in almost each position you need!
Specifications Beiter Bow Holder Set Vise:
Rotation: 360 graden
Details set:
Beiter Rip-Clutch Square with Adapter 5/16"- 24"
Beiter Rip-Clutch Round with adapter 5/16"- 24"
Efficient and compact set of allen wrenches by Maximal. Many bows need an allen wrench voor tuning, though a key is not always included in delivery. This set fits corresponding key sizes to tune your bow perfectly. In addition, the foldable set is provided with a gripped handle, providing extra comfort!
Dimensions when folded: 5,5 x 11 x 2,5 cm
Includes 9 allen wrench key sizes: 1/4", 7/32", 3/16", 5/32", 9/64", 1/8", 7/64", 3/32", 5/64"
With this digital bow scale from Booster you can easily measure the draw weight of your bow. Ideal for choosing the right arrows for your bow. Made of ABS and stainless steel housing, it can hold up to 100Lbs of pulling force.
Specifications Booster Digital Bow Scale:Handy modelCalculated Peak WeightDigital display Towing weight in LBS or Kilos.Maximum weight of 110Lbs or 50Kilo
The Avalon Arrow Inspection Spinner is the ideal tool to check if your arrows are straight. Due to the smooth bearings and solid base, it's easy to see if your shafts, points or pins are completely straight. The spinner is adjustable in length to inspect shorter zones or the arrow and the rubber feet prevent it from slipping.
The Beiter Limb Tip Line Gauges help to determine limb straightness and torsion. The Beiter Limb Tip Line Gauges must be placed between the string and the limbs: this avoids the string to be retained in the string groove and shows if the limb alignment is good.
With this Easton T-type bow square you can effortlessly place nocking points on your string, tie a D-loop in the right place and check the allignment of your bow. A must have in every shooter's equipment.Specifitactions Easton T-type Bow square:Material: AluminumColor : BlackLaser engraved markings in mm and inchesFor compound, recurve or traditional
With this Easton L-type bow square you can effortlessly place nocking points on your string, tie a D-loop in the right place and check the allignment of your bow. A must have in every shooter's equipment.Specifitactions Easton L-type Bow Square:Material: AluminumColor : BlackLaser engraved markings in mm and inchesFor compound, recurve or traditional
A bow square is indispensable in your archery equipment. You use this for placing your nocking point in the right place, checking and adjusting the brace height or checking the tiller of your bow. With this L-Type bow square from Avalon you always have the right tool at hand. The metal clamps click perfectly on the string, after which you can immediately place your nocking point at the correct height. The laser engraved markings are applied in both centimeters and inches.Specifications Avalon L-Type String Hook:Material: AluminiumLaser engraved markings in both CM and inchesL-TypeAvailable in 4 colors
The Pine Ridge Arrow Inspector helps you check the straghtness of your shafts and alignment of your arrows and components. Also great to use when building wooden arrows to see which side of the shaft you should cut. The inspector is made from high quality plastic, has aluminum wheels for friction free spinning and is easy to dismantle for storage or transport.
With this handy, digital bowscale you can easily determine the draw weight of your bow. You first determine your draw length and then you can use the Legend Bowscale to determine the draw weight at that draw length. Handy when you are adjusting your compound or when you want to determine the exact draw weight for the spines of your arrows.Specifications Legend Archery Digital Bow Scale:Handheld designDigital displayMeasures Peak or Holding weight in Kilograms or Pound (Lbs)Maximum weight of 110 Lbs or 50 Kilograms
Knowing the exact
draw weight of your bow is very important if you want well matched arrows. It
is very useful to be able to see how many lbs you get out of the bow at your
draw length. The specifications on the bow indicate the number of lbs at a
certain draw length, usually 28", but with your draw length you may get
more or less lbs from your bow. The Bearpaw Hand Held Bowscale is a handy tool
for this.
Efficient and compact set of allen wrenches by Bondhus. This set fits corresponding key sizes to tune your bow perfectly. In addition, the foldable set is provided with a Gorilla Grip handle, ensuring extra grip!
Includes 5 key sizes: 3/16, 7/32, 1/4, 5/16, 3/8"
Please note: the picture shows nine keys, the XL version is provided with five keys.
Efficient allen wrenches set with Inch and Torx keys by Bondhus. This set includes many different allen wrench sizes. The strong handle ensures extra grip!
Features Bondhus Allen Wrenches Set
Allen wrenches with strong T-handles
Inch and Torx set
Ergonomic design
Inch sizes from 3/32" to 3/8"
Including standard
Includes the following 10 allen keys: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8
This digital scale from Carbon Express offers the option of accurately tuning arrows. With its compact design you can easily take it with you and it offers you the opportunity to accurately measure feathers, points, nocks, shafts and other arrow parts. The scale can be set in Grains, grams and ounces, among other things. With its accuracy of 0.001 grams (0.15 grains) and maximum weight of 200 grams (3086 grains), you are in the right place with this grain scale.The clear LCD screen ensures that you can read the values clearly. Batteries are included.
Bearpaw Products is making history and revolutionizing arrow spine measuring technology with the Arrow Analyzer!
With the electronic Arrow Analyzer, a unique machines is invented for measuring the deflection (or spine) of arrows and arrow shafts. As a matter of fact, at the world’s largest archery trade show, it was recognized as one of the most impressive archery innovations they had seen in years. They instantly saw the potential of the Arrow Analyzer as a one-tool-does-all device.
Before it has always been difficult to check arrows and to make sure they were actually the spine that the manufacturers claimed. The old spine tester devices were all expensive, large and inconvenient to use. That has all changed thanks to a German developer, who designed and manufactured a machine that could not only check arrow deflection, but also checks arrow straightness and arrow / point weight. Together with Henry Bodnik, a simple machine was produced that is accurate, easy to use, and gives archers all the important information they need. With the Arrow Analyzer, archers can match their arrows perfectly for more accurate and consistent shooting.
The Arrow Analyzer accurately measures:
Arrow spine by the ATA standard or the Easton standard (wooden shafts & carbon)
Arrow mass and point mass weight
Arrow straightness under load and at each end of the arrow to see which end to cut
Features
Stores digital documentation of the measured values in the Arrow Analyzer software
Allows you to export your digital data via the interface to your computer or tablet
Gives you a choice between several exporting formats (Excel, OpenOffice)
Can be used anywhere with an external power source
All software and a user’s guide are included.
Download the manual here
A bow square is a tool that should be a part of the basic equipment of every archer. It allows you to easily check the tuning of your bow, from brace height, tiller and nocking point to peep height.Features Hoyt Bow SquareT-square style bow squareMaterial: anodized aluminumClearly readable laser etched reference marksAttaches to the string with metal clips. Can be read in both centimeters and inchesFeatures the Hoyt Brace Height Chart for quick and easy reference.
Want to neatly store your Allen Keys set and keep it with you? That's possible with this handy case! Suitable for a small Allen Keys set, the belt loop on the back makes it possible to attach the case to a belt.Please note, Allen Keys not included!
With it’s 3 grooved razor sharp-edges, any vane of any shaft is easily removed, as well as any residual adhesive.
Compact and easy to store due to it’s foldable design which also protects the blade.
With the integrated locking mechanism, it is not possible to accidentally close the blade. 4 different sized slots for adjusting a wide variaty of nocks.
Handle made out of aluminum and is available in 3 anodized finishes.
Efficient and compact set of Torx keys by Bondhus. This set fits all Torx and Star screws with the corresponding sizes. In addition, the foldable set is provided with a Gorilla Grip handle, ensuring extra grip!
Includes 8 key sizes:
T9, T10, T15, T20, T25, T27, T30 & T40
€29.95
This website uses cookies to ensure the best experience possible. More information...
