The Taper Tool made of plastic is the world’s most widely used tool to attach the cone for tip and nock to wooden arrows. Absolutely simple and reliable in its handling, it convinces archers in their daily use.
Material: PlasticSizes: 5/16, 11/32, 23/64 inches
With this TopHat®Thread Roughing Tab you can prep shafts for placing a parallel screw-on point. This ensures that the placement of the point goes a lot smoother.
Material: Stainless SteelAvailable sizes: 5/16, 11/32 and 23/64
InstructionsStick the TopHat®Thread Roughing Tab in the TopHat®Assembly Tool and twist it all the way on the shaft, if you have done this you can recplace the tab for the actual point.
With the TopHat Shaft Shaper it is possible to compress your arrow in a responsible way so it has the right diameter for placing a parallel point. Wood might slightly vary in diameter, with this tool you can make the discrepancy dissapear.
Material: Stainless SteelLength: 50mmSizes: 5/16 or 11/32
TopHat®Shaft shaper technology:The TopHat® Shaft- shaper set is composed of ftwo elements. A basepiece can be placed on the drilling machine and the desired attachement can be placed on the basepiece. Put the drilling machine on a slow speed if possible. The shaft has to go into the attachement until it can’t go any further, keep doing this until there is no resistance.
The ATA (Archery Trade Association) has determined the exact measurements and specifications for taper tools. The amount of angle and the length of the taper to be cut are precisely specified. This ensures that all tips and nocks fit perfectly on your wooden arrows.
Material: AluminiumContents: 3x shaft adapters – 5/16 inches, 11/32 inches, 23/64 inches
The Bearpaw Taper Tool Parallel is designed and manufactured according to the specifications of an arrow manufacturer from England. By rotating the milling insert a parallel taper is milled out of the wooden or bamboo shaft. Parallel screw and adhesive tips can be pushed onto the shaft and fit perfectly. The surfaces of the arrow shaft and the tip are almost identical. The Taper Tool Parallel is perfectly adapted to the use of the adhesive tip Bear Point.
Available versions: 5/16 inches, 11/32 inches, 23/64 inches
Use: wooden shafts, bamboo shafts
Function: parallel milling
Quality: Made in Germany