This short and light-weight insert made from high quality aluminum fits precisely into our Penthalon carbon shafts from the Traditonal series and our great Penthalon Hunter Extrem. It is perfect for all spine values 300-800.
Features:
Material: 1st grade aluminum
Weight: 12.3 grs.
Quality: Made in Germany
Use: Penthalon Traditional shafts, Penthalon Hunter Extrem, Heavy Hunter shafts and Easton carbon arrows with an ID of .245 inches
Nocks for carbon arrows. Perfect fit and very durable.
These nocks are suited for the Penthalon Traditional shafts, the Hunter Extreme shafts and other shafts with a .245 size.
Features
Weight: 11,8 grainSize: .245Available colours: white, black, yellow, fluor green, fluor orange, fluor red and transparent
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: Nickel-plated SteelSize: 5/16 (70 and 100 grain) and 11/32 (80, 100 and 125 grain)
The Penthalon Traditional Black arrows are produced by Bearpaw with extreme precision and accuracy. To create an arrow with an affordable price that flies really well Bearpaw used its beautiful, high quality natural feathers.
Specifications Bearpaw Penthalon Traditional Black Arrow
Full length: 31,5inch
Material: Carbon
Spine: 350, 400, 500, 600, 700, 800
Feathers: 4 inch shield
Point: Bullet 100gr
Colours:
Spine 350: 1x white 2x blue
Spine 400: 1x white 2x black
Spine 500: 1x white 2x yellow
Spine 600: 1x white 2x red
Spine 700: 1x black 2x red
Spine 800: 1x white 2x orange
Cedar shafts of the highest quality, Port Orford cedar has always the preference of many traditional top archers. There is no wooden shaft that can measure up to the qualities of Port Orford cedar. They are strong, elastic and have the perfect weight/spine ratio.
Features
Sizes: 5/16 or 11/32
Length: 30 inch
Natural productBecause wood is a natural product, the wooden shafts differ from each other, in inner and outer characteristics mostly but but barely in diameter. For example, not all shafts are equally as straight, or stiff or heavy. The spine size is also not always the same, because of this wooden shafts are classified and sorted into categories with a margin of 5 lbs. To produce as many equal shafts all shafts are spined, checked on tears and breaks and aligned by hand.
Tailor-madeWe deliver shafts in full length, 30 inch. For many people this is to long and the shaft will have to be shortened. For a small fee of €0,10 per shaft we will shorten your shafts to you desired length. We use a special sawing machine where we can be accurate to the millimeter.
For even better shooting results, we can sort the shafts by weight within a margin of one gram. We do this in groups of maximum 12 shafts. If you want more, we will divide it into groups whose weights are as close as possible to each other.
Made for wooden shafts. Has an extra large index wing on top.
Specifications
Size: 5/16 or 11/32
Model: Tapered
Type: Glue on
Colors: Black, Lime, Orange, Red, White, Yellow
Cedar shafts of the highest quality, Port Orford cedar has always the preference of many traditional top archers. There is no wooden shaft that can measure up to the qualities of Port Orford cedar. They are strong, elastic and have the perfect weight/spine ratio.
Features
Sizes: 5/16 or 11/32
Length: 32 inch
Natural productBecause wood is a natural product, the wooden shafts differ from each other, in inner and outer characteristics mostly but but barely in diameter. For example, not all shafts are equally as straight, or stiff or heavy. The spine size is also not always the same, because of this wooden shafts are classified and sorted into categories with a margin of 5 lbs. To produce as many equal shafts all shafts are spined, checked on tears and breaks and aligned by hand.
Tailor-madeWe deliver shafts in full length, 32 inch. For many people this is to long and the shaft will have to be shortened. For a small fee of €0,10 per shaft we will shorten your shafts to you desired length. We use a special sawing machine where we can be accurate to the millimeter.
For even better shooting results, we can sort the shafts by weight within a margin of one gram. We do this in groups of maximum 12 shafts. If you want more, we will divide it into groups whose weights are as close as possible to each other.
Insert van Gold Tip, deze insert lijm je in de schacht waarna je de punt erin kunt schroeven. Geschikt voor o.a. de Gold Tip Traditional schachten.
Eigenschappen Gold Tip Insert Acculite .246:
Maat: .246 inch
Gewicht: 12.1 grain
The TopHat Adapter is the perfect solution to be able to use screw-in points with your wooden shafts. The Adapter works the same way as an insert does, you can screw a point in it. This makes it really easy to change the weight at the front of the shaft. Of course you can use the Adapter with bullet, combo or field points.
The Adapter needs te be screwd on the shaft, you don’t need to prepare the shaft for this. TopHat claims you don’t even need glue to install the Adapter to your shaft! The Adapter is slightly conical so it always centers perfectly!
Features
Material: AluminumDiameter: 5/16 and 11/32Weight: 40 grains
Simple cedar arrow with a length of 28,5 inch. Comes complete with nock, point and natural feathers, ready for use. Ideal arrow for the recreational archer. Suited for bows up to max. 40/45 lbs.
Color of the feathers may differ from the photo.
Features
Material: CedarSpine: till 45Diameter: 5/16Feathers: 2,5 inch shield natural feathersPoint: Field pointLength: 30 inch
These arrows by Skylon are very usefull for archers with a longer drawlength, due to there 33inch shaftlength. Where most carbon shafts or arrows stop at 32inch, this Frontier arrow goes an inch longer which might be the difference you need. Ofcourse we can also cut these arrows to the desired length making this an arrow for all archers. These arrows are also lightweight, making it a fast arrow and with a inner diameter of .244 (6,2mm) lots of components from different brands fit the Frontier.
Standard we cut these arrows at the length of your choice and apply the inserts and points. If you don't want this, select the option 'Inserts and points seperately'. Very usefull when you want to use Protector Hats on your arrows.
The color of the feathers can differ per order.
Specifications Skylon Frontier Carbon Arrows:
Full Length: 33 inch
used points: 5/16 (300, 350 & 400 spine) - 9/32 (500-800 spine)
Material: 24-TON Carbon
ID: 6.2mm / .244" (S size)
Straightness: .005″
4 inch Fathers
SPINE
OUTSIDE DIAMETER
GRAIN PER INCH
LENGTH
800
6.85mm
4.20
33"
700
7.00mm
5.12
33"
600
7.05mm
5.58
33"
500
7.12mm
5.80
33"
400
7.35mm
7.33
33"
350
7.39mm
8.50
33"
3D point from the brand Bearpaw, these stainless steel points will never rust and every one comes with a special rubber O-ring to keep your tips in place and to eliminate arrow tip rattling. These point are available in several weights.
Specs Bearpaw 3D Combopoint Stainless Steel
Material: Stainless steel
Type: Screw-in point
Diameter: 5/16 inch
Color: Silver
Weights: 65, 85, 100, 125, 14, 175, 200, 250, 300 grain
Great points by TopHat, where other points might sometimes turn a bit loose over time, this points stays nice and tight because of the standard rubber o-ring. Just like points for wooden arrows, these points are a tiny bit wider than the shaft, making it easier to remove the arrow from the target.
This point is especially designed for 3D archery and because of it’s shape, really effective. This model point penetrates the target straighter then others, giving less tension in the shaft, giving it less chance of breaking.
Features
Material: Stainless Steel
Sizes: 9/32 and 5/16
Weight: 60 grain – 85 grain – 100 grain – 125 grain
These weights are our standard assortment, we are able to supply you with all TopHat products, so if you need an other weight please let us know.
These innerfit nocks by Skylon are suited for all shafts with an inner diameter (ID) of 4.2mm, the so called G-size. There are for example the Skylon Carbon Brixxon or Carbon Radius, the Bearpaw Penthalon Slim Line series or all Easton shafts/arrows that use a G-size nock.
These innerfit nocks by Skylon are meant for use with 6.2 mm inner diameter arrows. These would for instance be the following shafts by Skylon:Skylon Carbon EdgeSkylon Carbon FrontierSkylon Carbon SavageSkylon Carbon BentwoodThese nocks also fit in shafts from different manufacterers like Bearpaw, Gold Tip and Easton. As long as the innderdiameter of the shaft is 6.2 (mm) or .245 (inches).
Spruce wood shafting has a long tradition and a rich history in arrow making because it has excellent flight properties. This type of wooden shaft is particularly light in mass weight but it recovers quickly from the shot. Thus, the spruce wood stock is particularly suitable for use in 3D tournaments and for normal informal target shooting as well. Due to the lower arrow mass weight you get faster arrow speeds and flatter trajectories for more accurate shooting and, because of its excellent grain structure and inherent straightness, spruce wood shafts provide the perfect foundation for making the best wooden arrows.
Natural product
Because wood is a natural product, the wooden shafts differ from each other, in inner and outer characteristics mostly but but barely in diameter. For example, not all shafts are equally as straight, or stiff or heavy. The spine size is also not always the same, because of this wooden shafts are classified and sorted into categories with a margin of 5 lbs. To produce as many equal shafts all shafts are spined, checked on tears and breaks and aligned by hand.
Tailor-made
We deliver shafts in full length, 32 inch. For many people this is to long and the shaft will have to be shortened. For a small fee of €0,10 per shaft we will shorten your shafts to you desired length. We use a special sawing machine where we can be accurate to the millimeter.
For even better shooting results, we can sort the shafts by weight within a margin of one gram. We do this in groups of maximum 12 shafts. If you want more, we will divide it into groups whose weights are as close as possible to each other.
Specifications:
Diameter: 5/16
Length: 32 inch (full length)
Available spines: 25-30 LBS, 30-35 LBS, 35-40 LBS, 40-45 LBS, 45-50 LBS, 50-55 LBS and 55-60 LBS
Full-length feathers are the most versatile shape. Full-length feathers allow you to cut them to whatever finished shape you desire with the Bearpaw feather chopper. Add your own personal touch to your arrows by choosing the feather shape you prefer from our wide assortment of blades. Bearpaw Full length feathers are a pure natural product and will vary in length and base strength.
Specifications
Material: Turkey feather
Available colors: black, blue, brown, fluor green, fluor pink, fluor yellow, green, grey, olive green, orange, fluor orange, purple, red, white, yellow, midnight blue, turqoise, teal, wine red
Blunt points are used al over the world for practice. Also great for children who want to shoot at bottles, cans, trees etc. The Slip-Over blunt is placed over the regular point and is available in two sizes, 5/16 and 11/32. The smaller one, 5/16, is also compatible with fiberglass and wooden recreational arrows with the rounded point.
Features
Sizes: 5/16 or 11/32Color: BlackWeight 5/16: 100 grainWeight 11/32: 125 grain
Bearpaw Arrow Wraps are a great way to follow your arrows during their flight and if you miss the target your arrow will be much easier to find. When fletching your arrows glue will adhere better to a wrap than a bare shaft and when you remove the wrap there will be no glue residue left neither from the vanes/feather nor the wrap itself. Besides the practical benefits an arrow wraps makes your arrow look very stylish of course!
Features
Material: Decorative vinyl
Color: Rattlesnake print
Size: about 17.8 cm x 3.4 cm
Unit: Per piece
The classic bullet point is a very popular point. It is very common with Fita shooters, the shape makes it a target friendly point and easy to remove from the target.
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: BrassType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100, 125 grainWeight 11/32: 80, 100, 125 grain
Northern Pine is one of the oldest types of wood that is used to produce arrows. Even this day Northern Pine is used by many archers because of the good balance between stability and weight. Northern Pine is very robust and a bit heavier then for instance Cedar, it is also a type of wood that is very easy to stain or lacquer.
Natural productBecause wood is a natural product, the wooden shafts differ from each other, in inner and outer characteristics mostly but but barely in diameter. For example, not all shafts are equally as straight, or stiff or heavy. The spine size is also not always the same, because of this wooden shafts are classified and sorted into categories with a margin of 5 lbs. To produce as many equal shafts all shafts are spined, checked on tears and breaks and aligned by hand.
Tailor-madeWe deliver shafts in full length, 32 inch. For many people this is to long and the shaft will have to be shortened. For a small fee of €0,10 per shaft we will shorten your shafts to you desired length. We use a special sawing machine where we can be accurate to the millimeter.
For even better shooting results, we can sort the shafts by weight within a margin of one gram. We do this in groups of maximum 12 shafts. If you want more, we will divide it into groups whose weights are as close as possible to each other.
Specifications:
Diameter: 5/16 and 11/32Length: 32 inch (full length)Available spines:5/16: 25-30 LBS, 30-35 LBS, 35-40 LBS, 40-45 LBS, 45-50 LBS11/32: 40-45 LBS, 45-50 LBS, 50-55 LBS, 55-60 LBS, 60-65 LBS, 65-70 LBS
The TopHat Protector Ring is used to protect the shaft from impact. You can use it on the front and back of the shaft for optimal protection. The Protector Ring is placed onto a carbon shaft before the assembly of insert or nock. Thus, the durability of the carbon shaft after missed shots is increased significantly. Even with hits on hard objects, the Protector Ring will often prevent the destruction of the front part of the carbon shaft.
A great product which is worth every single penny!
Check the data file in the images to see what size you need for your Bearpaw shafts
These insert from Skylon are ment for Screw-in points after installing the inserts in the shaft. to be used with shafts or arrows with an inner diameter (ID) of 6.2mm. Such as these Skylon arrows.Skylon Carbon EdgeSkylon Carbon SavageSkylon Carbon FrontierSkylon Carbon BentwoodSkylon Carbon RoveSkylon Carbon 3K MaverickSkylon Carbon Phoric
These Pure Archery wraps allows you to easily follow your arrows during flight, helps find back your missing arrows, but most of all an arrow wrapped with a bright color looks very stylish.
The wraps are produced in collaboration with Socx, a well-known company specialized in high quality wraps. Therefore, great quality and durability is guaranteed with these colorful Pure Archery wraps!
Specifications Pure Archery Arrow Wraps:
Material: High quality vinyl
Color: Yellow
Size: +/- 16cm x 3cm
Unit: Per piece
These inserts are made for use with 6.2 inner diameter shafts. These are for example the following Skylon shafts:Skylon Carbon Edge Skylon Carbon Rove Skylon Carbon 3K Maveric Skylon Carbon Bentwood Skylon Carbon Phoric
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: Stainless SteelType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100 grainWeight 11/32: 80, 100, 125 grain
The classic bullet point is a very popular point. It is very common with Fita shooters, the shape makes it a target friendly point and easy to remove from the target.
The TopHat Classic points have a innovative design, you don’t need glue to install this point, you don’t even have to sharpen/taper the shaft. Installing this point is simple, just screw the shaft until you hit the end of the thread. The point is now anchored. We recommend using the TopHat Roughing tab to make installing your points even easier.
Features
Material: Burnished SteelType: Parallel screw on pointDiameter: 5/16 and 11/32Weight 5/16: 70, 100 grainWeight 11/32: 100, 125 grain
€0.95
This website uses cookies to ensure the best experience possible. More information...